Re: Access Violation on Application exit

Oh, very good! This fixed my problem. Now it works like a charm.

Bob

> From: "Mike Ghan" <mikeghan_at_logix-controls.com>
> The example in Win2.F does not execute the :ONSYSEXIT chain. It should
> be modified as follows:
>
> : WINMAIN ( -- )
> 1 TO APPLICATION DEMO DISPATCHER
> 'ONSYSEXIT CALLS \ Execute System Exit Chain
> 0 ExitProcess ;
>

>From: "Bob Nash"
> I had the same problem once upon a time. I can't remember the exact
> cause,
> but I think it was a bad word in the ":onsysexit" chain.
>
> From: Robert Dickow [mailto:dickow_at_uidaho.edu]

> Thanks for all the tips about Windows message loops and all. Yes, my
> program uses what I thought was the canonical method, and in fact
> started
> out with one of the template programs in the SwiftForth 2.2.2 stuff. My
> program worked perfectly under 2.2.2 but broke under 2.2.9, so something
><snip>...

----------------------------------------------------------------------
sftalk_at_forth.com The SwiftForth programming discussion email list
To unsubscribe, send subject "unsubscribe sftalk" to listar_at_forth.com
For help with listar commands, send subject "help" to listar_at_forth.com
Archives are located at http://www.forth.com/sftalk -- check them out!
Search the archives! Visit http://www.forth.com/search for details.
Received on Wed Sep 19 2001 - 16:43:05 PDT