Re: sf doesn't work anymore

Try opening another 'windows' program. Then right click on the taskbar and
select 'tile windows vertically'. Then you should be able to grab the lower
right corner of the SwiftForth window and 'shrink' it.

Live long and prosper,
Charles

> -----Original Message-----
> From: sftalk-bounce_at_forth.com [mailto:sftalk-bounce_at_forth.com]On Behalf
> Of IB-KOVACS_at_t-online.de
> Sent: Friday, December 06, 2002 9:24 AM
> To: sftalk_at_forth.com
> Subject: [sftalk] Re: sf doesn't work anymore
>
>
>
> roger,
>
> thanks for the seriously fast reply.
> and yes, you are right, now it's working.
>
> the point is,
> sf is not accepting anything else than maximized window mode anymore:
> either all or nothing ...
> i tried all userland possibilities several times,
> up and down, back and forth, no go ...
> unfortunately i do not spontanously know how to tweak
> registry or ram for this issue, the search goes on ...
>
> if you or anybody else has a pointer, thank you!
>
> Roger Dube schrieb:
>
> >One thought... You might have clobbered your window size - try
> >right-clicking on the icon on the toolbar at the bottom, choose
> MOVE, click
> >a right arrow, then move your mouse... if my guess is right, you
> will see
> >an SF toolbar with its dimensions collapsed. Pull them back open.
> >
> >- Roger
> >
> >At 02:40 PM 12/6/2002 +0100, you wrote:
> >
> >
> >
> >>after recieving an evaluation key for the newest swiftforth yesterday,
> >>i was able to start swiftforth, play a little bit w/ the
> builtin examples,
> >>shutdown and start again about 3-4 times but then it just didn't work
> >>anymore,
> >>i.e. it's starting, but doesn't pop up any windows (specially
> the main w.),
> >>though it can be seen as an already loaded, registered process
> >>(w/ e.g. sysinternals's processexplorer).
> >>One example (graphics, don't remember which one) hung deeply,
> >>it might be related to that somehow.
> >>BTW s o m e examples didn't work properly.
> >>if anybody would like to put some light on this ...
> >>
> >>----------------------------------------------------------------------
> >>sftalk_at_forth.com The SwiftForth programming discussion email list
> >>To unsubscribe, send subject "unsubscribe sftalk" to listar_at_forth.com
> >>For help with listar commands, send subject "help" to listar_at_forth.com
> >>Archives are located at http://www.forth.com/sftalk -- check them out!
> >>Search the archives! Visit http://www.forth.com/search for details.
> >>
> >>
> >
> >----------------------------------------------------------------------
> >Dr. Roger Dube
> >
> >rdube_at_entropylock.com
> >
> >President/CEO
> >Digital Authentication Technologies, Inc.
> >
> >http://www.entropylock.com
> >
> >TEL +1.561.392.7404
> >Boca Raton, FL 33434
> >----------------------------------------------------------------------
> >
> >This E-mail message and any attachments have been scanned for
> viruses and
> >are believed to be free of any virus or other defect that might
> affect any
> >computer system into which it is received and opened. However, it is the
> >responsibility of the recipient to ensure that it is virus free and no
> >responsibility is accepted by Digital Authentication
> Technologies, Inc. for
> >any loss or damage arising in any way from its use.
> >
> >This email message is for the sole use of the intended
> recipient(s) and may
> >contain confidential and privileged information. Any
> unauthorized review,
> >use, disclosure or distribution is prohibited. If you are not
> the intended
> >recipient, please contact the sender by reply email and destroy
> all copies
> >of the original message. Any views expressed in this message are
> those of
> >the individual sender, except where the sender specifically
> states them to
> >be the views of Digital Authentication Technologies, Inc.
> >
> >----------------------------------------------------------------------
> >sftalk_at_forth.com The SwiftForth programming discussion email list
> >To unsubscribe, send subject "unsubscribe sftalk" to listar_at_forth.com
> >For help with listar commands, send subject "help" to listar_at_forth.com
> >Archives are located at http://www.forth.com/sftalk -- check them out!
> >Search the archives! Visit http://www.forth.com/search for details.
> >
> >
> >
>
>
> ----------------------------------------------------------------------
> sftalk_at_forth.com The SwiftForth programming discussion email list
> To unsubscribe, send subject "unsubscribe sftalk" to listar_at_forth.com
> For help with listar commands, send subject "help" to listar_at_forth.com
> Archives are located at http://www.forth.com/sftalk -- check them out!
> Search the archives! Visit http://www.forth.com/search for details.
>

----------------------------------------------------------------------
sftalk_at_forth.com The SwiftForth programming discussion email list
To unsubscribe, send subject "unsubscribe sftalk" to listar_at_forth.com
For help with listar commands, send subject "help" to listar_at_forth.com
Archives are located at http://www.forth.com/sftalk -- check them out!
Search the archives! Visit http://www.forth.com/search for details.
Received on Fri Dec 06 2002 - 08:21:55 PST