R. is only available if you're connected to a CPU32 processor via the BDM.

> -----Original Message-----
> From: swiftx-bounce_at_forth.com [mailto:swiftx-bounce_at_forth.com]On Behalf
> Of Bulgrien, Dennis
> Sent: Tuesday, December 18, 2001 9:09 AM
> To: 'swiftx_at_forth.com'
> Subject: [swiftx] R. NO PORT
>
>
>
> I run R. which displays:
> CPU R. NO PORT
>
> What does that mean? The manual doesn't descibe this error message:
>
> R. ( - )
> Display target CPU registers and CPU mode-running or FREEZE mode
> (BDM).
> ----------------------------------------------------------------------
> swiftx_at_forth.com The SwiftX programming discussion email list
> To unsubscribe, send subject "unsubscribe swiftx" to listar_at_forth.com
> For help with listar commands, send subject "help" to listar_at_forth.com
> Archives are located at http://www.forth.com/swiftx -- check them out!
----------------------------------------------------------------------
swiftx_at_forth.com The SwiftX programming discussion email list
To unsubscribe, send subject "unsubscribe swiftx" to listar_at_forth.com
For help with listar commands, send subject "help" to listar_at_forth.com
Archives are located at http://www.forth.com/swiftx -- check them out!
Received on Tue Dec 18 2001 - 09:58:55 PST