Re: separate flash space problem -- solved

Hi! Frank,

    Mine(2.04.2A) didn't work too.

    Jach

----- Original Message -----
From: "Frank Boon" <fboon_at_runbox.com>
To: <swiftx_at_forth.com>
Sent: Monday, August 07, 2006 5:48 PM
Subject: [swiftx] Re: separate flash space problem -- solved

> Can somebody check whether the SPM instruction works on the AVR
> platform? (It doesn't work on my Swiftx 3.2.4 AVR)
>
> CODE SPM RET END-CODE
>
> And why should the instruction be not supported?
>
> Best regards,
> Frank Boon
> Metatronics
>
> Jach Fong schreef:
> > Hi!
> >
> > I usually use another way to put the codes into the upper 64KB area
of
> > ATMega128.(need new compiler
> > words to support their execution, but it is not concerned in this
problem).
> > The codes can be correctly saved
> > into TARGET.HEX. My SWiftX version is 2.04.2A. Not sure if it will work
on
> > other versions.
> >
> > $12000 EQU TopCode
> > ....
> > THERE ( --adr) TopCode OVER - GAP
> > : boot 12 . ; \ put the codes into the upper 64KB
> > THERE EQU TopCode \ save it for next time usage
> > ( --adr) THERE - GAP \ restore the pointer in lower 64KB
> >
> > Best Regards,
> >
> > Jach Fong
> >
> > At 01:55 AM 2006/8/4, you wrote:
> >
> >> This is another example of somebody who should read the manual better
> >> !!! :-[
> >> if
> >>
> >> [BUILD.F]
> >> [...]
> >> FLASH SAVE-CODE TARGET.HEX
> >> FLASHBOOT APPEND-CODE
> >> [...]
> >>
> >> then
> >>
> >> [TARGET.HEX]
> >> [...]
> >> :1017D000C7DF0895F894F2E0E2E4B0E0A8EAD2E0CE
> >> :1017E000C6E9F3E0E9E3EDBFFEBF7894D8CFFFFF91
> >> :103800000E9428000C000E94C9050895FFFFFFFFD9
> >> :00000001FF
> >>
> >> Frank Boon wrote:
> >>
> >>
> >>> guess what happens is I change BUILD.F
> >>>
> >>> [BUILD.F]
> >>> [...]
> >>> SAVE-CODE TARGET.HEX
> >>> [...]
> >>>
> >>> to
> >>>
> >>> [BUILD.F]
> >>> [...]
> >>> FLASHBOOT SAVE-CODE TARGET.HEX
> >>> [...]
> >>>
> >>> then
> >>>
> >>> [TARGET.HEX]
> >>> :103800000E9428000C000E94C9050895FFFFFFFFD9
> >>> :00000001FF
> >>>
> >>> But both sections in one file? I think it's not possible as I can't
look
> >>> into/change the compiler.
> >>>
> >>> Any comments? I will make a work-around, but it's not pretty!
> >>>
> >>> best regards,
> >>> Frank Boon
> >>>
> >>> Frank Boon wrote:
> >>>
> >>>
> >>>
> >>>> I use SWIFTX to program the flash. I think the compiler is the
culprit
> >>>> here..
> >>>>
> >>>> I looked at the TARGET.HEX file, and the section doesn't show up in
the
> >>>> HEX-file.
> >>>>
> >>>>
> >>>> [TARGET.HEX]
> >>>> :100000000C94EA0B18950000189500001895000054
> >>>> :1000100018950000189500000C9497091895000099
> >>>> :100020001895000018950000189500000C94210800
> >>>> :10003000189500001895000018950000189500000C
> >>>> :1000400018950000189500001895000018950000FC
> >>>> :10005000BA93AA93FF91EF913196EF93FF93319763
> >>>> :10006000EE0FFF1FC895A02D3196C895B02D0895AD
> >>>> [...]
> >>>> :1016E000AA930E94280008000E9491010E94B7005E
> >>>> :1016F0000E942800FF000E94540108950E94A80241
> >>>> :101700000E942800080051DA0E94990208950E9460
> >>>> :10171000A8020E942800100048DA0E949902089549
> >>>> :10172000AC91BB27EBDF08950D90BC91A02DEFDFAE
> >>>> :1017300008950E9428000C002CDA0895B0D90954AD
> >>>> :10174000455354424F415244E4D808950C9105BB8F
> >>>> :10175000A991B99108950C9102BBA991B9910895ED
> >>>> :101760007ADFA5DD08950C043A03003A0300000077
> >>>> :1017700000960200000A00D001D001DD5EFFBA939E
> >>>> :10178000AA93F7E1E6E6B0E0A0E690E085E1C8952F
> >>>> :1017900031960D920197D9F7A991B99108950E94B8
> >>>> :1017A00028003A030E944A020E941F02E8DF0CDF71
> >>>> :1017B00012960E945702BA93AA930E9428003600FC
> >>>> :1017C0003BD80E94280011000E946103C2DD9CDD0D
> >>>> :1017D000C7DF0895F894F2E0E2E4B0E0A8EAD2E0CE
> >>>> :1017E000C6E9F3E0E9E3EDBFFEBF7894D8CFFFFF91
> >>>> :00000001FF
> >>>>
> >>>> Leon Wagner wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>> Looks like you're not burning both CDATA sections into flash.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> -----Original Message-----
> >>>>>> From: swiftx-bounce_at_forth.com
> >>>>>> [mailto:swiftx-bounce_at_forth.com] On Behalf Of Frank Boon
> >>>>>> Sent: Thursday, August 03, 2006 7:36 AM
> >>>>>> To: swiftx_at_forth.com
> >>>>>> Subject: [swiftx] separate flash space problem
> >>>>>>
> >>>>>> Can anybody see what I'm doing wrong?
> >>>>>>
> >>>>>> Platform: ATMEL MEGA16.
> >>>>>>
> >>>>>> What: I'm trying to setup a bootloader, which must reside in
> >>>>>> a particular space in de flash (last 2k).
> >>>>>>
> >>>>>> Problem: A simple word isn't compiled in the separate flash space.
> >>>>>>
> >>>>>> Thanks in advance,
> >>>>>> Frank Boon
> >>>>>> Metatronics
> >>>>>>
> >>>>>>
> >>>>>> [config.f]
> >>>>>> [...]
> >>>>>> 3800 3FFF CDATA SECTION FLASHBOOT \ Flash code space
> >>>>>> BOOTLOADER 2K
> >>>>>> (byte addressed)
> >>>>>> 0000 37FF CDATA SECTION FLASH \ Flash code space
> >>>>>> (byte addressed)
> >>>>>> FLASH
> >>>>>> 0060 01CF IDATA SECTION IRAM \ Internal initialized data
> >>>>>> 01D0 045F UDATA SECTION URAM \ Internal uninitialized
data
> >>>>>> [...]
> >>>>>>
> >>>>>> [app.f]
> >>>>>> [...]
> >>>>>> FLASHBOOT
> >>>>>> : boot 12 . ;
> >>>>>> FLASH
> >>>>>> : noboot 12 . ;
> >>>>>> [...]
> >>>>>>
> >>>>>>
> >>>>>> [command window output]
> >>>>>> [...]
> >>>>>> INCLUDE BUILD
> >>>>>> Start End Size Used Unused Type Name
> >>>>>> 0000 37FF 14336 6126 8210 CDATA FLASH
> >>>>>> 3800 3FFF 2048 12 2036 CDATA FLASHBOOT
> >>>>>> 0060 01CF 368 21 347 IDATA IRAM
> >>>>>> 01D0 045F 656 429 227 UDATA URAM ok
> >>>>>> [...]
> >>>>>> CONNECT TARGET ok
> >>>>>> [...]
> >>>>>> boot
> >>>>>> TARGET READY ok
> >>>>>> [...]
> >>>>>> noboot 12 ok
> >>>>>> [...]
> >>>>>> See noboot
> >>>>>> 1732 |TIB| CALL 0E942800
> >>>>>> 1736 LITERAL C 0C00
> >>>>>> 1738 . RCALL 2CDA
> >>>>>> 173A RET 0895 ok
> >>>>>> [...]
> >>>>>> See boot
> >>>>>> 3800 7 R31 SBRS FFFF
> >>>>>> 3802 7 R31 SBRS FFFF
> >>>>>> 3804 7 R31 SBRS FFFF
> >>>>>> 3806 7 R31 SBRS FFFF
> >>>>>> 3808 7 R31 SBRS FFFF
> >>>>>> 380A 7 R31 SBRS FFFF
> >>>>>> 380C 7 R31 SBRS FFFF
> >>>>>> 380E 7 R31 SBRS FFFF
> >>>>>> 3810 7 R31 SBRS FFFF
> >>>>>> 3812 7 R31 SBRS FFFF
> >>>>>> 3814 7 R31 SBRS FFFF
> >>>>>> 3816 ETC...
> >>>>>> [...]
>
>>>>>> ---------------------------------------------------------------------
-
> >>>>>> swiftx_at_forth.com The SwiftX programming discussion email
list
> >>>>>> To unsubscribe, send subject "unsubscribe" to
> >>>>>> swiftx-request_at_forth.com For list command help, send subject
> >>>>>> "help" to swiftx-request_at_forth.com Message archives are
> >>>>>> located at http://www.forth.com/archive/swiftx
>
>>>>>> ---------------------------------------------------------------------
-
> >>>>>> This list is a forum for SwiftX users. For product support
> >>>>>> and bug reports, please send email to support_at_forth.com
>
>>>>>> ---------------------------------------------------------------------
-
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
>
>>>>> ----------------------------------------------------------------------
> >>>>> swiftx_at_forth.com The SwiftX programming discussion email
list
> >>>>> To unsubscribe, send subject "unsubscribe" to
swiftx-request_at_forth.com
> >>>>> For list command help, send subject "help" to
swiftx-request_at_forth.com
> >>>>> Message archives are located at http://www.forth.com/archive/swiftx
>
>>>>> ----------------------------------------------------------------------
> >>>>> This list is a forum for SwiftX users. For product support and bug
> >>>>> reports, please send email to support_at_forth.com
>
>>>>> ----------------------------------------------------------------------
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>
> >> ----------------------------------------------------------------------
> >> swiftx_at_forth.com The SwiftX programming discussion email list
> >> To unsubscribe, send subject "unsubscribe" to swiftx-request_at_forth.com
> >> For list command help, send subject "help" to swiftx-request_at_forth.com
> >> Message archives are located at http://www.forth.com/archive/swiftx
> >> ----------------------------------------------------------------------
> >> This list is a forum for SwiftX users. For product support and bug
> >> reports, please send email to support_at_forth.com
> >> ----------------------------------------------------------------------
> >>
> >
> >
> > ----------------------------------------------------------------------
> > swiftx_at_forth.com The SwiftX programming discussion email list
> > To unsubscribe, send subject "unsubscribe" to swiftx-request_at_forth.com
> > For list command help, send subject "help" to swiftx-request_at_forth.com
> > Message archives are located at http://www.forth.com/archive/swiftx
> > ----------------------------------------------------------------------
> > This list is a forum for SwiftX users. For product support and bug
> > reports, please send email to support_at_forth.com
> > ----------------------------------------------------------------------
> >
> >
> >
>
> ----------------------------------------------------------------------
> swiftx_at_forth.com The SwiftX programming discussion email list
> To unsubscribe, send subject "unsubscribe" to swiftx-request_at_forth.com
> For list command help, send subject "help" to swiftx-request_at_forth.com
> Message archives are located at http://www.forth.com/archive/swiftx
> ----------------------------------------------------------------------
> This list is a forum for SwiftX users. For product support and bug
> reports, please send email to support_at_forth.com
> ----------------------------------------------------------------------
>

----------------------------------------------------------------------
swiftx_at_forth.com The SwiftX programming discussion email list
To unsubscribe, send subject "unsubscribe" to swiftx-request_at_forth.com
For list command help, send subject "help" to swiftx-request_at_forth.com
Message archives are located at http://www.forth.com/archive/swiftx
----------------------------------------------------------------------
This list is a forum for SwiftX users. For product support and bug
reports, please send email to support_at_forth.com
----------------------------------------------------------------------
Received on Mon Aug 07 2006 - 19:51:53 PDT